-
Hot
16-bit High Resolution Weighing Transmitter 0-10V 4-20mA Modbus RTU Load Cell Amplifier with Multi-Output for Silo Tank Weighing
The power supply voltage of transmitter is DC 12-26V, and the power consumption is less than 3W. Data acquisition accuracy is 12-16 bits (related to sampling speed) Communication sampling RS485-ModbuSRTU protocol, communication rate of 1200-115200bps (default 19200/8 data bits/no check /1 stop bit); The real-time measured values can be read by the upper computer, and the operations such as zero clearing, calibration and parameter modification can be realized. The transmission output is 0-10V or 4-20mA. Communication and transmission can output accurately at the same time. One-key zero clearing and automatic zero clearing function The comprehensive accuracy error is 0.1%.
Send Email Details -
Hot
Cheap weighing scale load cell amplifier voltage and current converter weight transmitter 0-5V 0-10V 4-20mA
The external transmitter adopts aluminum alloy shell. The internal imported high-performance device is used to accurately amplify the sensor output signal. The internal voltage regulation, constant current supply bridge, voltage and current conversion, impedance matching, linear compensation, humidity compensation, etc. Convert the mechanics and quantity into standard current and voltage signal output, which can switch 0-5V/1-5V/0-10V, 4-20mA. It can be directly connected to the interface of the automatic control device PLC MCU, host computer terminal, etc.] or computer. With standard signal external zero adjustment, external adjustment gain function, input over protection, output short circuit protection.
Send Email Details -
SOP510 weighing transmitter for aluminum profile shell
The SOP510 transmitter adopts an aluminum profile shell, with original imported high-performance devices used internally to precisely amplify the sensor output signal. Internally, it undergoes voltage stabilization, constant current bridge supply, voltage current conversion, impedance adaptation, linear compensation, humidity compensation, etc. Convert mechanics and quantities into standard current and voltage signals for output, which can switch between 0 ± 5V/0 ± 10V/4-20mA/0-20mA. It can directly interface with automatic control equipment such as PLC, microcontroller, upper computer terminal, or be connected to a computer network. Equipped with standard signal external zero and external gain adjustment functions, input over protection, output short circuit protection, and other characteristics.
Send Email Details
