Details of high pressure blower before use
Many people often confuse high pressure blowers with general blowers. Although they are similar in structure, they are essentially equipment of different categories and often have different application scenarios. The heat resistant and wear-resistant high-pressure blower has declared to the customer that its quality is excellent. It can not only resist external interference, but also cope with harsh testing of various harsh environments. As long as the operator can implement the following three preparatory operations before controlling the blower, it can ensure the safety of operation.
1. One of the preparations for the clear control of the high-pressure blower is to set up a muffler at the air outlet. Do not ignore this process. Some blowers have high vibration frequency and high noise decibels during operation. If the noise reduction equipment is not provided in time, the operator's eardrum will suffer from problems, which is not conducive to health in the long run.
2. Check whether the filter is blocked, and then clearly control the second preparatory operation of the high-pressure blower. Timely check whether the filter set inside is blocked. If the blockage is severe and is not found in time, it will lead to unexpected situations. Only accurate sorting can solve the blocking problem, keep the filter in a smooth state, and promote the blower to play more roles.
3. The number of buttons set for the high pressure blower with good quality of the air volume and air pressure regulating valve can prevent accidental touch. The corresponding control skills can be quickly grasped, but the air volume and air pressure must be adjusted in advance. These two aspects determine whether the high-pressure blower can work normally. In other words, if the set button does not meet the practical requirements, the blower may fail.