-
Hot
OEM Customized Force Sensor Load Cell 1T 2T 3T 5T Compression Type Weighing Sensor for Industrial Hopper Tank Scale
The sensor adopts a flat diaphragm pressure-sensitive housing and a diaphragm integrated structure, which has a small volume and stable reliable performance. It is applicable to various industrial automation measurement and control system.
Send Email Details -
Hot
ODM OEM Cantilever Weight Sensor Alloy Steel Resistance Sensor Cutting Beam Load Cell 15T Shear Beam Load Cell for Weighing Silo
Tension link load cell sensor is generally installed on the fixed end of wire rope, one side is connected to wire rope, the other side is connected to the shelves of fittings on the arm. It detects the crane's actual bearing under the principle that when the wire rope has a stream of tension after being stretched. The sensor is with the features like reasonable structure, compact, high accuracy, good stability, convenient installation and replace etc
Send Email Details -
Hot
Side Pressure Tension Load Cell Weight Sensor 50kg for Measurement and Control of Tension
1.The lateral pressure tension sensor is a double-hole shear beam structure, which is convenient to install and use, simple to operate and easy to maintain, and is specially used to measure the tension of steel wire rope. The wire rope is fixed on the sensor through U-bolt. When the wire rope is pulled, the force is applied to the sensor through the steering wheel. 2.It is suitable for lifting, water conservancy, mining industry and all kinds of tension testing industries. it can be used for tension measurement or long-term monitoring of wire rope. 3.Its characteristics are as follows：High accuracy、 Stable performance、Suitable for wire rope tension force measurements.
Send Email Details -
Hot
Lifting Equipment Tower Crane Elevator Force Measurement Mechanical Engineering Alloy Steel Pin Load Cell 10 Ton Weight Sensor
The elastic element is a whole round shaft, which is compact in structure and simple in geometric shape, and is easy to process with high dimensional and positional accuracy. The shaft section has strong torsion resistance and bending resistance, and the stress at the neutral axis of the shaft pin is the largest; When the important official pin is subjected to vertical and horizontal bending, the section with zero bending moment is in the same section; It is easy to assemble with related load-bearing parts and convenient to use. Accept customization, and can customize different solutions according to different needs of customers.
Send Email Details -
Hot
Large Range Force Column Sensor Alloy Steel 100t Column Load Cell Weighting Sensor for Automation Force Control
This product is simple in structure design and low in cost. The design of its sealing diaphragm changes the complicated process of matching the shell in the past, overcomes the defect that the shell of the traditional sensor is easy to be damaged due to deformation, and greatly improves the sealing performance of the sensor. Compared with the traditional column sensor, the sensor with this structure has higher accuracy in linearity, lateral resistance, torsion resistance and azimuth error.
Send Email Details -
Hot
Digital Dynamometer Load Cell 10T 12T 15T Wireless Board Ring Dynamometer for Industrial Weight Measure
1.Using 3200mAh lithium battery for power supply, the working time of the system is about 20 hours under the condition of 3Hz communication, and the charging time is within 6 hours. 2.The sampling rate is 80Hz, the sampling accuracy is better than 0.1%, and the sampling linearity is better than 0.1%. 3.Wireless communication distance in open area is ≥ 100 m. 4.It can work normally in the range of -25 to 50℃ 5.The overall protection level is IP65.
Send Email Details -
Hot
High Precision Column Load Cell Force Sensor Column Weighing Load Cells for Truck Scale
This product is simple in structure design and low in cost. The design of its sealing diaphragm changes the complicated process of matching the shell in the past, overcomes the defect that the shell of the traditional sensor is easy to be damaged due to deformation, and greatly improves the sealing performance of the sensor. Compared with the traditional column sensor, the sensor with this structure has higher accuracy in linearity, lateral resistance, torsion resistance and azimuth error. This small size is suitable for the production and testing of 3C digital products. Traditional column sensors are widely used in various electronic weighing equipment such as track scales, hopper scales and platform scales.
Send Email Details -
Hot Sell China Wholesaler Low Price Micro Load Cell Small Weight Sensor Weighing Load Cell for Automation Equipment
1.High precision and compact structure. 2.Environmental Protection IP65 with complete hermetic sealing. 3.It is suitable for force measurement and control, automation equipment, aging testing machine, key stress analysis and power-assisted device in 3C digital production.
Send Email Details
